Multi linear Elastic Link Tension Only

Creation date: 6/4/2021 3:55 PM Updated: 6/4/2021 3:55 PM multi linear elastic link temperature

Question:

Hi Midas

My intension was to understand the thermal interaction behavior between two parallel elements.

Model Description:

Two simple rectangular beams are modelled having vertically 500mm spacing. Both beams are simple supported, one end translationally fixed other end sliding. Only bottom beam a uniform thermal load of 35⁰C is applied. There are multilinear spring between the two beams @1m interval are exist. The multilinear spring stiffness defined as a tension spring only, as per the below screenshot.

However, in the result, there is no axial load in either of the beam. but I can see the bottom beam is axially deforming.

May I ask if the multilinear spring definition is not correctly defined. Please find attached .mcb file for reference.

Answer:

Hello,

The displacement diagram for spring 1 and spring 2 is shown below.

The local x-direction of elastic link is upwards, hence the positive direction for the link displacement is upwards.

Spring 1 and spring 2 are the one defined in earlier example by you.

Now, when the point load is applied on lower beam, the lower beam deflects downwards. So, j-th end of the elastic link(upper beam node) has relatively moved away/ moved up with respect to i-end of elastic link(lower beam end).

In spring 1, when deflection is positive, the elastic link provide stiffness to movement, hence load is transferred to upper beam.

While in spring 2, for positive deflection, there is no spring stiffness or no load is transferred.

So, it depend on the direction of local-axis of the spring and defined multi-linear spring table data.

In original example, where temperature load was applied, the deformations are

As temperature load is applied in lower beam, the lower beam moves in +z direction of the elastic link.

Now, as the j end of the elastic spring(upper node) is behind/moved in-z direction with respect to i-end of the spring(lower node), the relative displacement will be negative. So, the model in which spring is defined with negative function, will transfer the load.

DataImage28.png

DataImage52.png

Multi Linear Tension Link_Model 2.mcb

Multi Linear Tension Link.mcb

multi linear spring_tension.avi

DataImage72.png

DataImage96.png

Files		Sort by Name Sort by Date
	DataImage28.png 16 KB
	DataImage52.png 107 KB
	Multi Linear Tension Link_Model 2.mcb 117 KB
	DataImage67.png 321 KB
	DataImage65.png 116 KB
	DataImage7.png 16 KB
	DataImage13.png 68 KB
	DataImage82.png 53 KB
	DataImage27.png 46 KB
	DataImage41.png 36 KB
	DataImage66.png 84 KB
	DataImage25.png 87 KB
	Multi Linear Tension Link.mcb 117 KB
	multi linear spring_tension.avi 2 MB
	DataImage72.png 23 KB
	DataImage96.png 18 KB

Multi linear Elastic Link Tension Only

Contents